Filter
Top Products
Reference Manual
00809-0100-4708, Rev AD
September 2012
Rosemount 708
2-2
AMS
®
Wireless Configurator
AMS Wireless Configurator is capable of connecting to devices directly, using
a HART modem, or remotely using the Gateway. To configure the Rosemount
708, double click (or right click and select Configure/Setup) on the device
icon that will appear below either the HART modem or Gateway connection
tree.
DEVICE NETWORK
CONFIGURATION
In order to communicate with the Gateway, and ultimately the host system,
the transmitter must be configured to communicate with the wireless network.
Using a Field Communicator or AMS Wireless Configurator, enter the
Network ID and Join Key so that they match the Network ID and Join Key of
the Gateway and other devices in the network. If the network ID and join key
are not the same as the Gateway, the acoustic transmitter will not
communicate with the network. The Network ID and Join Key may be
obtained from the Gateway on the Setup>Network>Settings page on the
web server, shown in Figure 2-1.
Figure 2-1. Gateway Network
Settings
AMS Right click on the acoustic transmitter and select Configure. When the menu
opens, select Join Device to Network and follow the method to enter the
Network ID and Join Key.
Field Communicator The Network ID and Join Key may be changed in the wireless device by using
the following Fast Key sequence. Set both Network ID and Join Key.
Function Key Sequence Menu Items
Join Device to
Network
2, 1, 2 Network ID, Set Join Key