Filter
Top Products
Reference Manual
00809-0100-4708, Rev AD
September 2012
4-1
Rosemount 708
Section 4 Commissioning
Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-1
Verify Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-1
SAFETY MESSAGES Instructions and procedures in this section may require special precautions to
ensure the safety of the personnel performing the operations. Information that
potentially raises safety issues is indicated by a warning symbol ( ). Please
refer to the following safety messages before performing an operation
preceded by this symbol.
Warnings
NOTE
The Rosemount 708 and all other wireless devices should be installed only
after the Gateway has been installed and is functioning properly.
Wireless devices should be powered up in order of proximity from the
Gateway, beginning with the device closest to the Gateway. This will result in
a simpler and faster network installation.
VERIFY OPERATION There are three ways to verify operation: using the Field Communicator, using
the Gateway’s integrated web interface, or by using AMS
®
Suite Wireless
Configurator or AMS Device Manager.
If the Rosemount 708 was configured with the Network ID and Join Key, and
sufficient time has passed, the transmitter will be connected to the network. If
Network ID and Join Key were not configured, please reference
Troubleshooting on page 4-3.
NOTE
It may take several minutes for the device to join the network.
Failure to follow these installation guidelines could result in death or
serious injury.
• Make sure only qualified personnel perform the installation.
Explosions could result in death or serious injury:
Installation of this transmitter in an explosive environment must be in accordance with the
appropriate local, national, and international standards, codes, and practices. Please review
the Product Certifications section for any restrictions associated with a safe installation.
• Before connecting a Field Communicator in an explosive atmosphere, ensure the
instruments are installed in accordance with intrinsically safe