Filter
Top Products
Reference Manual
00809-0100-4708, Rev AD
September 2012
4-3
Rosemount 708
NOTE
SteamLogic software is provided for viewing steam trap status. Refer to the
manual on the CD for more information.
Troubleshooting
If the device is not joined to the network after power up, verify the correct
configuration of the Network ID and Join Key, and that Active Advertising has
been enabled on the Gateway. The Network ID and Join Key in the device
must match the Network ID and Join Key of the Gateway.
The Network ID and Join Key may be obtained from the Gateway on the
Setup>Network>Settings page of the web server (see Figure 4-3 on
page 4-3). The Network ID and Join Key may be changed in the wireless
device by following the Fast Key sequence shown below.
Figure 4-3. Smart Wireless
Gateway Network Settings
Function Key Sequence Menu Items
Join Device to
Network
2, 1, 2 Network ID, Set Join Key