Filter
Top Products
English
www.doro.com 21
English
Settings
Recall Button Timing
In some PBX installations, the timing of the Recall button may need to
be adjusted. For normal domestic use, this setting should not require
changing.
If the telephone has been purchased in Australia this setting will be
displayed as 3/4.
1.
Press
w
(
R
)
.
2.
Scroll using
88
/
99
until
w
ashes in the display. Press
0
0
.
0
3.
Press
0
repeatedly until the display shows 4/5. - UK (3/4 - Australia).
0
repeatedly until the display shows 4/5. - UK (3/4 - Australia).
0
4
.
Scroll using
88
/
99
to the desired setting:
= 100ms
=
=
270ms (UK) - 600ms (AU/NZ)
5.
Press
0
to con rm setting and move to the next programming
0
to con rm setting and move to the next programming
0
sequence, alternatively.
6.
Press
w
(
R
)
to exit the Menu system.
PBX Function
This telephone has a PBX function that will automatically insert a pause
between the rst and second digits of the telephone number before dialling.
For example: When the function is activated (see below), dialling a phone
number ie: ”0123456”, the phone will dial: “0” followed by a pause, and
then the remaining part of the number: “123456”.
If the telephone has been purchased in Australia this setting will be
displayed as 4/4.
1.
Press
w
(
R
)
.
2.
Scroll using
88
/
99
until
w
ashes in the display. Press
0
0
.
0
3.
Press
0
repeatedly until the display shows 5/5. - UK (4/4 - Australia).
0
repeatedly until the display shows 5/5. - UK (4/4 - Australia).
0
4.
Scroll using
88
/
99
to the desired setting (YES=on, NO=off). Press
0
to con rm.
0
to con rm.
0
5.
Press
w
(
R
)
to exit the Menu system.