Filter
Top Products
English
20
www.doro.com
20 www.doro.com20
Settings
Tone/Pulse Dialling (UK only)
Select dialling type (tone or pulse). The default setting is tone dialling,
dependant on your network system requirements this may not require
changing.
This setting only applies to models purchased in the UK.
1.
Press
w
(
R
)
.
2.
Scroll using
88
/
99
until
w
ashes in the display. Press
0
0
.
0
3.
Press
0
repeatedly until the display shows 2/5.
0
repeatedly until the display shows 2/5.
0
4.
Scroll using
88
/
99
to the desired setting (TONE/PULSE). Press
0
to con rm setting and move to the next programming sequence,
0
to con rm setting and move to the next programming sequence,
0
alternatively.
5.
Press
w
(
R
)
to exit the Menu system.
Line Adaptation
On some telephone networks and PBX systems, it may be necessary to
adjust the microphone level.
If the telephone has been purchased in Australia this setting will be
displayed as 2/4.
1.
Press
w
(
R
)
.
2.
Scroll using
88
/
99
until
w
ashes in the display. Press
0
0
.
0
3.
Press
0
repeatedly until the display shows 3/5. - UK (2/4 - Australia).
0
repeatedly until the display shows 3/5. - UK (2/4 - Australia).
0
4.
Scroll using
88
/
99
to the desired setting (A/B=normal, C=medium,
D=low).
5.
Press
0
to con rm setting and move to the next programming
0
to con rm setting and move to the next programming
0
sequence, alternatively.
6.
Press
w
(
R
)
to exit the Menu system.