Filter
Top Products
Using the Configuration Wizard
5
Using the Configuration Menu (contin
10.1.1.1
Whenever you want to configure your
network or the DVG-2001S, you can
access the Configuration Menu by
opening the web-browser and typing in
the IP Address of the DVG-2001S.
The DVG-2001S default IP Address is
shown to the right:
• Open the web browser
• Type in the IP Address of the
Router (
http://10.1.1.1)
• Type admin in the User Name
field
• Type admin in the Password
field
• Click OK
The Home > Wizard screen will appear.
Please refer to the Quick Installation
Guide for more information regarding the
Setup Wizard.
These buttons appear on most of the
configuration screens in this section.
Please click on the appropriate button at
the bottom of each screen after you have
made a configuration change.
Clicking this button will save configured
settings to the router.
Click refresh will refresh the statistics of the
curre
nt window.
Clicking Cancel will clear changes made to
the current page.
Clicking Help will provide the user with
helpful information about the current
window.
Note: if you have changed the default IP
Address assigned to the DVG-2001S,
make sure to enter the correct IP
Address.