Filter
Top Products
Advanced > VOIP > Server Configuration
The VoIP Terminal Adapter can
be configured to handle voice
signals over the Internet Protocol
(Voice Over IP − VOIP). The
screen shown to the right, along
with those on the following pages
are used to configure your router
to communicate with the devices
that will send and receive
telephone calls over the Internet.
Server FQDN Use this drop-down menu to Enable or Disable the Server
Fully Qualified Domain Name (FQDN) function. This is
disabled when the SIP URL domain name is different from
the SIP proxy server domain name. The phone will then use
the domain name in Domain Name field as part of SIP URL
but send and receive SIP messages through the SIP proxy
server defined in the Service Domain field.
IP Address Enter the IP address of the SIP Server in this field.
Domain Name Enter the domain name corresponding to the IP address
entered above in this field.
Port Enter the SIP server’s listening port for the SIP in this field.
Leave this field set to the default if your VoIP service
provider did not give you a server port number for SIP.
Service Domain Enter the SIP service domain name in this field.
URL Format Select SIP-URL to have the router include the domain name
with the SIP number in the SIP messages that it sends.
11