Filter
Top Products
37
How can I assign a Static IP
Address in Windows 2000?
(continued)
Click “Use the following IP Address” and
enter an IP Address that is on the same
subnet as the LAN IP Address on your
VoIP Terminal Adapter.
Example: If the
VoIP Terminal Adapter´s LAN IP Address
is 10.1.1.1, make your IP Address
10.x.x.x where x = 2-254. Make sure that
the number you choose is not in use on
the network.
Set the Default Gateway to be the same
as the LAN IP Address of your VoIP
Terminal Adapter (10.1.1.1).
Set the Primary DNS to be the same as the LAN IP address of your VoIP
Terminal Adapter (10.1.1.1).
The Secondary DNS is not needed or enter
a DNS server from your ISP. Click OK twice.
You may be asked if you want to reboot your
computer. Click Yes.
Frequently Asked Questions (continued)
Why can´t I access the web based configuration? (continued)