Filter
Top Products
Frequently Asked Questions
Why can´t I access the web based configuration?
When entering the IP Address of the DVG-2001S (10.1.1.1), you are not connecting to
the Internet or have to be connected to the Internet. The device has the utility built-in to
a ROM chip in the device itself. Your computer must be on the same IP subnet to
connect to the web-based utility, however.
To resolve difficulties accessing a web utility, please follow the steps below.
Step 1 Verify physical connectivity by checking for solid link lights on the device.
If you do not get a solid link light, try using a different cable or connect to a different port
on the device if possible. If the computer is turned off, the link light may not be on.
What type of cable should I be using?
The following connections require a Crossover Cable:
Computer to Computer
Computer to Uplink Port
Computer to Access Point
Computer to Print Server
Computer/XBOX/PS2 to DWL-810
Computer/XBOX/PS2 to DWL-900AP+
Uplink Port to Uplink Port (hub/switch)
Normal Port to Normal Port (hub/switch)
The following connections require a Straight-through Cable:
Computer to Residential Gateway/Router
Computer to Normal Port (hub/switch)
Access Point to Normal Port (hub/switch)
Print Server to Normal Port (hub/switch)
Uplink Port to Normal Port (hub/switch)
Rule of Thumb: ”If there is a link light, the cable is right.”
29