Filter
Top Products
Frequently Asked Questions (continued)
33
Why can´t I access the web based configuration? (continued)
Step 4
Check your IP Address. Your computer must have an IP Address in the
same range of the device you are attempting to configure. Most D-Link devices use
either 10.0.0.1 or the 192.168.0.X range.
How can I find my IP Address in Windows 95, 98, or ME?
Step 1 Click on Start and then click on Run.
Step 2 The Run Dialogue Box will appear. Type winipcfg in the window as shown
then click OK.
Step 3 The IP Configuration window will appear, displaying your Ethernet
Adapter Information.
Select your adapter from the drop-down menu.
If you do not see your adapter in the drop-down menu, your adapter is
not properly installed.