Filter
Top Products
Web Page Item Description
Enable Event Generation When selected, Event Generation is enabled.
Remote Event Server
Remote Event Server IP Type the Remote Event Server IP address.
(64 character limit)
Remote Event Server Port Type the Remote Event Server port number.
(8 character limit)
Remote Event Server URL Type the Remote Event Server URL.
(127 character limit)
Events
Enable Button Events When selected, Button Events are enabled.
Enable Call Active Events When selected, Call Active Events are enabled.
Enable Call Terminated Events When selected, Call Terminated Events are enabled.
Enable Relay Activated Events When selected, Relay Activated Events are enabled.
Enable Relay Deactivated
Events
When selected, Relay Deactivated Events are enabled.
Enable Ring Events When selected, Ring Events are enabled.
Enable Night Ring Events When selected, there is a notification when the unit receives a
night ring.
Enable Multicast Start Events When selected, Multicast Start Events are enabled.
Enable Multicast Stop Events When selected, Multicast Stop Events are enabled.
Enable Power On Events When selected, Power On Events are enabled.
Enable Security Events When selected, Security Events are enabled.
Enable 60 Second Heartbeat
Ev
ents
When selected, 60 Second Heartbeat Events are enabled.
Click the Sa
ve button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the T
est Event button to test an event.
Click on the Reboot button to reboot the system.
Operations Guide 930500E CyberData Corporation
49
Installing the VoIP V3 Indoor Intercom
Configure the Event Parameters
Table 2-16. Event Configuration