CyberData 11113 Intercom System User Manual


 
Operations Guide 930500E CyberData Corporation
25
Installing the VoIP V3 Indoor Intercom
Log in to the Configuration Home Page
3. On the Home Page, review the setup details and navigation buttons described in Table 2-6.
Web Page Item
Description
Device Settings
Device Name Shows the device name.
Change Username Type in this field to change the username.
Change Password Type in this field to change the password.
Re-enter Password
Type the password again in this field to confirm the new
password.
Current Settings
Serial Number Shows the device serial number.
Mac Address Shows the device Mac address.
Firmware Version Shows the current firmware version.
IP Addressing Shows the current IP addressing setting (D
HCP or static).
IP Address Shows the current IP address.
Subnet Mask Shows the current subnet mask address.
Default Gateway Shows the current default gateway address.
DNS Server 1 Shows the current DNS Server 1 address.
DNS Server 2 Shows the current DNS Server 2 address.
Speaker Volume Shows the current speaker volume level.
Microphone Gain Shows the current microphone gain level.
SIP Mode is Shows the current status of the SIP mode.
Multicast Mode is Shows the current status of the Multicast mode.
Event Reporting is Shows the current status of the Event Reporting mode.
Nightringer is Shows the current status of the Nightringer mode.
Primary SIP Server Shows the current status of the Primary SIP Server.
Backup Server 1 Shows the current status of Backup Server 1.
Backup Server 2 Shows the current status of Backup Server 2.
Click the Sa
ve button to save your configuration settings.
Note: Y
ou need to reboot for changes to take effect.
Click on the Rebo
ot button to reboot the system.
Table 2-6. Home Page Overview