Filter
Top Products
10
Using Your Telephone
Line Use Indications
Each Line Button has an indicator to show you the status of the
telephone line, as shown below:
No Light Line is available, if connected
Blinks once every 2 seconds Line is in use by this phone
Quickly blinks on and off repeatedly Line is on hold by this phone
Slowly blinks on and off repeatedly Line is on hold by another phone
Fast Flash Line is ringing
Constantly lit Line is in use by another phone
Handset Operation
Placing a Telephone Call
1. Lift the handset.
NOTE: The first available line will automatically be selected. You may press
a line button to dial out from a specific line.
2. Dial the telephone number you wish to call. The number will appear
on the display window.
3. After the conversation has finished, place the handset back in the
cradle to disconnect.
Answering a Telephone Call (CO Line or Intercom)
1. When your station rings from an outside line call or an intercom
call, pick up the handset to answer.
2. After the conversation has finished, place the handset back in the
cradle to disconnect.
Placing an Intercom Call
1. Lift the handset.
2. Press the button. The display will show ICM, the
button will light, and you will hear intercom tone in the
handset.
3. Dial the extension number you wish to call.
NOTE: After pressing the button, you may use the first 11 speed
dial buttons as station select buttons. The buttons are
preprogrammed as extensions 11 thru 22, from left to right, top to
bottom.
4. After the conversation has finished, place the handset back in the
cradle to disconnect.
Speakerphone and Headset (when activated) Operation