Filter
Top Products
6
Installation
What’s Included With Your 4-Line Speakerphone
(1) Base Telephone
(1) Handset
(1) Handset Coil Cord
(1) 12VDC, 400mA AC Adapter
(2) 2 Pair (4 Conductor) Line Cords
(1) 2 Pair (4 Conductor) Short Cord for Wall Mounting
(1) User Guide
Site Planning
This telephone can be connected to 4 separate telephone lines. You
may connect directly to (2) 2-Line RJ14C telephone jacks. If (4) RJ11C
jacks will be used, you will need to use 2-line couplers to combine the
lines into 2 cords: Lines 1 and 2 on one cord, lines 3 and 4 on the
second cord.
In order for multiple 4-Line telephones to inter-operate as a system,
observe these precautions:
1. Be sure Line 1 is connected throughout the system.
2. Be sure any other line you wish to appear on a phone is in the
same position as the other phones. Never cross phone lines (i.e.
Line 3 on Ext. 11 cannot be Line 2 on a different extension. It must
be line 3).
3. Do not connect other devices to Line 1 (fax, modem, etc.).
4. Do not connect Line 1 to a Digital Subscriber Line (DSL).
5. The combined total length of cable allowed between all telephones
in the system cannot exceed 600 feet.
Select a Location For Your Telephone
This telephone may be used on a desk or wall mounted. Choose a
location that meets the following requirements:
1. Near an AC outlet.
2. Near the telephone line jack(s).
3. Away from any electrical machinery or appliances.
Install the Batteries
This telephone requires three “AA” size batteries to retain user
programmed settings in case of power failure. This telephone will not
operate during a power outage.