Filter
Top Products
24
13. Area Code: Empty for H.A.C. and all L.A.C.
14. Speed Dial: Empty for all locations
15. Ring Volume: Middle
16. Speaker Volume: Level 4
17. Handset Volume: Minimum
18. Headset Volume: Minimum
Ringer Enable / Disable
You may enable or disable any individual line or lines on the 4-line
telephone.
Ringer Disable/Ringer Enable
1. Press the PROGRAM key.
2. Press the up or down arrow key to scroll to the “Line Ring” item.
3. Press the right arrow key to select this item.
4. Press the up or down arrow key to select a line.
5. Press the right arrow key to confirm your selection.
6. Press the up or down arrow key to turn the line ringer On or Off.
7. Press the right arrow key to confirm your selection.
Speed Dial
There are a total of 24 speed dial locations on the telephone. The
speed dial buttons are in 2 groups: 12 direct dial buttons, and 12 shifted
direct dial buttons that can be accessed using the button followed
by one of the 12 direct dial buttons.
Each speed dial location can store up to 24 digits, including Pause and
Flash.
Dialing from a Speed Dial Location
• To call a number in one of the first group of 12 speed dial locations,
press the speed desired speed dial button from an idle telephone,
or by first pressing an outside line button.
• To call a number in one of the second group of 12 speed dial
locations, press the button followed by the desired speed
dial button from an idle telephone, or by first pressing an outside
line button.
Pulse to Tone Switching *
If you have pulse dialing service, you may need to access calling services
such as banking and voice mail using tone dialing. You may temporarily
switch from pulse dialing to tone dialing during a call in order to access
these features. The system is reset to pulse dialing after you hang up.