Filter
Top Products
8
1.
2.Makinga call
3.Receivingacall
a.Using handset
LINE2
b.Using speakerphone
SPEAKER LINE1
LINE2
SPEAKER
c.Switching acallbetween handsetand speakerphone
SPEAKER
LINE1 LINE 1
SPEAKER
LINE2 LINE 2
SPEAKER
1. Pick up the handset, then LINE1LED willlight. If you useLINE2 and
press button,thentheLINE2LEDwilllight.
2.Afteryouhearadialtone,enterthetelephonenumber.
3.Toendthecall,simply replacethehandsetinthecradle.
1. Press the button or button, then LINE1 LED will
light. Ifyou useLINE 2,press button,then theLINE2 LED will
light.
2.Afteryouhearadialtone,enterthetelephonenumber.
3.Toendthecall,pressthe button.
Duringa callwithhandset,toswitchyour calltospeakerphone,press
button then hang up the handset. In this mode, you can
makeoransweracall.Toswitchback,simplyliftthehandset.
When a call isreceived, the phonerings, and LINE1 orLINE2 LED will
flash. AlsotheLCDshowsthecallerID number.
If LED flashes, press button or pick up the handset or
press buttontoanswer.
If LED flashes, press button or pick up the handset or
pressthe buttontoanswer.
Receiver or Speaker Volume Control - To adjust the receive
volume in either the handset or speaker, press or .
There are 8 steps of adjustment.
VOL.- VOL.+
FUNCTION BUTTONS
21
DISPLAY MESSAGES
REPEAT
msg
A caller ID record consists of the following information:
Time and Date
Caller's Name and Number
* Note that this feature requires caller ID service from your telephone
company.
CALLER ID INFORMATION
In addition to the Message Waiting light, an icon will appear in the
display whenever there are messages. This icon is " ". It will
remain until all messages have been cleared. The display will also
show MESSAGE WAITING at the bottom if there is a message. Note
that this requires voice mail service from a service provider.
MSG