Filter
Top Products
Other Features GCA70-245
84 Comdial August, 03
7.11 Service Observing
If your LCD speakerphone provides the installer–programmed
service observing feature, you can use it to monitor a conversation or
activity at another telephone in an undetected manner. You can use
this feature while you are in the speakerphone mode or off-hook.
• To monitor another station at any time,
1. PRESS INTERCOM.
2. DIAL #03.
3. DIAL extension number of telephone to be monitored.
4. PRESS SPEAKER to end monitoring.
5. Your system installer may also program a dedicated SERVICE
OBSERVE button that may be used in place of the feature access
code.
7.12 Switching The Dialing Mode
Between Pulse And Tone
If the telephone service in your locality is pulse (rotary dialing), the
installer arranges your telephone to dial in this manner. If you need to
send tones during a dialing sequence (for example, to send bank-by-
telephone tones), you can convert to tone dialing mode while dialing.
The system will switch back to pulse dialing when you end your call.
You can store a ‘#’ as part of a speed dial number to cause an auto-
matic switch from pulse to tone where needed in a number sequence.
• To convert to tone dialing at any time during dialing or
while on an active call,
—DIAL #.