Vertical Communications SCS 8324S Answering Machine User Manual


 
rogramming GCA70-245
60 Comdial August, 03
6.3 Feature Access Codes
In addition to the system features which may be programmed using
the interactive buttons, several other features may be programmed by
using their access codes. The feature codes are programmed like
speed dial numbers and can occupy the same programmable buttons
on your telephone.
• To store a system feature access code,
1. SELECT OPTIONS.
2. SELECT NEXT until SDIAL option
appears.
3. SELECT SDIAL or ADIAL.
4. PRESS programmable button OR dial
pad button (0–9) to choose storage
location.
5. DIAL access code associated with
feature.
6. SELECT SAVE to store the number.
7. REPEAT previous steps until all
numbers are stored, OR SELECT
EXIT.
8. PRESS SPEAKER to end
.
NOTE: Access codes are listed in Appendix C, Quick Reference
Guide - DSU II Digital Expandable Systems found on page 119.
NOTE: The telephone system allows only one autodial number at
a programmable button; however, you can store an autodial num
-
ber or feature code at a second level of a location where a DSS is
already stored; just repeat the programming procedure.
S
elect Location
PREV
Choose a Location
Enter Number
PREV