Filter
Top Products
Programming
YourTelephone
9.1 Programming For Speed Dialing
Speed dialing is a feature that lets you:
•
store and dial lengthy numbers using one or two buttons,
•
store and dial intercom numbers of frequently called telephones,
•
store frequently used feature codes.
You can store numbers for speed dialing at the following locations:
•
at any programmable button that is not now assigned as a line button
or other feature by the system administrator or installer,
•
at the keypad numbers 0–9 (primary level only),
•
on a secondary level at any of the programmable button locations.
Before you begin programming, write down the intercom or outside line
you will use and the number digits that you are storing. Then, as you
program the speed dial numbers, write the first and second level numbers
on your telephone’s ID strips. You can also fill out the charts on the next
page, if you wish, for a personal record of your stored numbers.
NOTE: The Federal Communications Commission (FCC) requires
that when programming emergency numbers and(or) making
test calls to emergency numbers:
1. Remain on the line and briefly explain to the dispatcher the
reason for the call;
2. Perform such activities in the off-peak hours, such as early
morning or late evening.
9
GCA70–250 Programming Your Telephone
LCD Speakerphone Reference Manual 9 – 1
telemanuals.com