Filter
Top Products
7.17 Switching The Dialing Mode
Between Pulse And Tone
If the telephone service in your locality is pulse (rotary dialing), the
installer arranges your telephone to dial in this manner. If you need to
send tones during a dialing sequence (for example, to send
bank-by-telephone tones), you can convert to tone dialing mode while
dialing. The system will switch back to pulse dialing when you end your
call.
You can store a # as part of a speed dial number to cause an automatic
switch from pulse to tone where needed in a number sequence.
• To convert to tone dialing at any time during dialing or while on
an active call,
1. Press #.
7.18 Using Background Music
If the telephone system supplies background music, you can turn it on at
your LCD speakerphone while it is on-hook and idle. The system
automatically turns background music off during calls and voice
announcements.
• To turn the music on,
1. Press OPTIONS.
2. Press MUSIC.
3. Press SET.
4. Select SRC 1 or SRC 2 for the music source (the system is
equipped to provide music from two sources, but this feature must
be enabled by the installer).
5. Press SPEAKER to end (the SPEAKER light turns on when
background music is on).
6. Adjust music volume with the volume buttons.
Using The Other Telephone Features GCA70–250
7 – 16 LCD Speakerphone Reference Manual