ClearSounds V608 Telephone User Manual


  Open as PDF
of 52
 
6 – ENGLISH
7 – ENGLISH
Dialing using two-touch Memory Buttons
1 Lift the handset and wait for a dial tone.
2 Press theMEMORYkey andmemorylocation (0-9), the stored
telephone number will now be dialed.
Flash
TheFLASHbuttoncanbeusedtoobtainanewdialtoneafterending
a call. If you subscribe to Call Waiting or three-way calling from
your local phone company you can use the FLASH button to switch
between calls.
Speakerphone
You can make outgoing or receive incoming calls by speakerphone.
Simply press the SPEAKERPHONE button and the sound will be
switchedtospeaker.TheSpeakerphoneLEDwilllight.
You can adjust speaker volume by setting the right side speaker
volume control.
To switch between the handset and the
speakerphone.
While on a call using the handset, press the Speaker Button and
replace the handset in the cradle.
While on a call using the speakerphone, simply lift the handset.
Headset (headset not included)
You can plug a 2.5mm headset instead of the speakerphone or
handset mode.
Tomakeoutgoingcalls and receive incoming calls, plug the headset
to the 2.5mm headset jack(locatedontheleftsideofthephone).
Press the Speakerphone button to get a dial tone.
Note: When using the headset the call is not amplified
Shaker (Shaker not included)
At the rear of the phone, there is a 3.5mm shaker jack. You can
connectanoptionalshakerdevice.Duringringing,theshakerwill
vibrate to alert you.
ANSWERING MACHINE OPERATION
The answering machine has to be turned on in order to receive
messages. When a call is received it will be answered after the
selectednumberofrings(seeAnsweringmachineset-up).
Photo50-TriLingual.indd 7 7/6/08 11:11:12 AM
 previous next