12 – ENGLISH
13 – ENGLISH
40 seconds, you will hear a tone. Press any key to continue.
Room Monitoring
ThisremoteaccessfeatureenablesyoutocallyourhomeandturnON
the answering machine’s microphone function, allowing you to monitor
sounds in the room where the answering machine is situated.
Turning the answering machine on from a
remote location
Theansweringmachinecanbeactivatedusingtheremotecontrol
functions.
1 Calluptheansweringmachine.Afterapproximately10rings,the
machine will answer and emit a long tone.
2 Enter the remote code, printed underneath the unit. If the code is
accepted, you will hear two short beeps.
3 Press9#.Twobeepsconfirmsthattheansweringmachineisnow
on. Replace the handset.
Out of Memory
The total capacity of the answering machine’s memory is
approximately14minutes.
The memory space is shared between the outgoing message,
personal memos, and regular incoming messages.
When the memory is full the display will show FL, the answering
machine will answer after 10 rings to allow remote playback and
deletion of messages, no new messages will be accepted until the
existingmessageshavebeenplayedanderased.
FCC WANTS YOU TO KNOW
This equipment complies with Part 68 of the FCC rules and the
requirementsadoptedbytheACTA.Onthebottomofthisequipment
is a label that contains, among other information, a product identifier
intheformatUS:AAAEQ##TXXXX.Ifrequested,thisnumbermust
be provided to the telephone company. An applicable certification
jacks Universal Service Order Codes (USOC)for theequipment is
provided(i.e.,RJ11C)inthepackagingwitheachpieceofapproved
terminal equipment
The RENis useful to determine the quantity ofdevices you may
connect to your telephone line and still have all of those devices ring
when your telephone number is called. In most, but not all areas,
the sum of the REN’s of all devices connected to one line should not
exceedfive(5.0).Tobecertainofthenumberofdevicesyoumay
Photo50-TriLingual.indd 12 7/6/08 11:11:12 AM