Filter
Top Products
19
NOTE: When you plug the headset into the HEADSET JACK, it automatically mutes
the microphone and speaker of the cordless handset. Unplug the headset to return the
handset to normal use.
Ordering a Headset or Neckloop: Headsets are available at most retail outlets that sell
telephone equipment or contact ClearSounds Communications at 800-965-9043 or visit
www.clearsounds.com. We recommend using the ClearSounds Headset or ClearSounds
CLA7 Amplied Powered Neckloop.
Phone Book Operation
Storing Name And Numbers To Phone Book
You can store up to 60 names and numbers in the memory.
Dialing a number from phone book
1. In standby mode, press the “MEMO” button, and then the LCD shows the total
number of records.
2. Press the or arrow button to go to the record you want to dial. Please
see REVIEWING NAMES & NUMBERS IN THE PHONE BOOK (on page #20)
for other modes of selection.
3. When the screen displays the number you want to dial, press the symbol.
The phone automatically dials the number.
VIP Function
If you store a name ending with “
*
” key, it will be a VIP (Very Important Person) number.
When a VIP number is received, the handset ringer will operate (ring) whether or not it is
turned ON or OFF.
Adding numbers and names to phone book
1. Begin with the phone in the standby mode, add the new number you want to
store using the keypad. Enter the phone number up to 23 digits.
2. Press the “MEMO” button and then the LCD will show NAME.
3. Enter the name up to 11 characters using the “2 to 9” on keypad.
Press the 2 key once for A, twice for B and 3X for C.
Press the number “1” key to insert a space between name.
Press the “F” button to erase any mistake.
4. Press the “MEMO” button to confirm and a confirmation beep will sound.