Filter
Top Products
30 31
3. Press the UP (▲) or DOWN (▼) button
to go to the record to be stored to the
EMERGENCY key.
4. Press and hold the EMERGENCY key for
2 seconds.
5. The phone number is copied to the
EMERGENCY key. The LCD will display MEM
STORING for one (1) second and the
handset will give a success keynote.
Dialing the EMERGENCY Number
1. Unit must be in standby mode only.
2. Press the EMERGENCY key once.
3. The display will show the stored name and
number for 5 seconds. Otherwise it will show
-MEMORY EMPTY-.
4. Then the handset goes off-hook and dial out
the stored numbers.
Or
5. Press TALK key to make handset goes off-hook.
6. Press the EMERGENCY key once. The display
will show the stored name and number for 1
sec. Then the numbers will be sent out.
Deleting the EMERGENCY Number
1. Unit must be in standby mode.
2. Press the EMERGENCY key once.
3. If this key has been programmed, the display
will show the stored number. Otherwise, it
will show MEMORY EMPTY.
4. Press DEL/CH key once to delete number.
5. The display will flash DELETE?.
6. Press DEL/CH to delete. The handset will
give a success keynote and the display will
show MEM DELETED.
CALLER ID OPERATIONS
Visual Message Waiting Indicator (VMWI)
Note: This is a service that is provided through your
local telephone company.
If the C4210 finds that there is voice message to be
retrieved, it will turn on the Message Waiting Indica-
tor (the ENTER key).
To retrieve the voice message, press the ENTER key
while the indicator is on. The handset will go off-
hook and dial the stored Voicemail number.
CALLER ID Information
This function is turned off when EASY MODE is set
to ON during setup.
Caller Information
When somebody calls, the received caller informa-
tion is displayed on the LCD. If the call is answered
by this phone, this caller information is considered
“old”. Otherwise, the Caller ID information will be
stored in the call log. Information which has not been
reviewed will be considered as “new call”.
The NEW CALL LED will blink. The top row displays
the time and date of the call. The second row displays
the caller’s ID or is blank if there is no information.
The third row displays the incoming telephone num-
ber. If the number is longer than twelve (12) digits,
the LCD will toggle the displayed number between
the first 12 digits and the remaining digits.
Receiving Call Waiting Caller ID
When you are on an existing call, you will hear a
beep and the display will show incoming call waiting
Caller ID information.
TELEPHONE OPERATIONS TELEPHONE OPERATIONS