Filter
Top Products
28 29
Changing a Stored Number
1. Unit must be in standby mode only.
2. Press MODE key twice. The display will show
PHONEBOOK for 1 second and then display
the first available record.
3. Press the UP (
▲) or DOWN (▼) button to go
to the record to be changed, e.g. ABC, 567
4. Press # key to change the phone record.
5. The display will show ENTER TO END and
the stored number 567 with the blinking
cursor after the digit 7.
6. Press any numeric key to add extra numbers.
Or
Press DEL/CH key to move the cursor to the
digit 7. Then press other numeric key to
replace 7.
7. Press ENTER after finishing the digits.
8. The display shows ABC with the cursor
blinking after the character C.
9. Press any numeric key 2 to 9 to add
extra characters.
Or
Press DEL/CH key to move the cursor back
to character C. Then press any other
numeric key to change this character.
10. Press ENTER to finish. The modified
characters and numbers will replace the
original phone record.
11. The display will show NUMBER STORED.
Adding the EMERGENCY Number
1. Unit must be in standby mode only.
2. Press MODE key twice. The display will show
PHONEBOOK for 1 second and then display
the first available record.
Dialing a Phonebook Entry
1. Locate the phonebook record you wish
to call.
2. Press TALK or ENTER button to dial the
displayed number.
Deleting a Stored Number
1. Unit must be in standby mode and display
is showing a phonebook record.
2. Press DEL/CH key once. The LCD will
show DELETE?
3. Press DEL/CH to confirm.
4. The display will show MEM DELETED for 3
seconds together with a success keynote.
5. The display will show the next available
record or -NO RECORDS-.
• If the memory location is empty, pressing
DEL key will have no action.
• This sequence will time-out after 30
seconds if no key is pressed.
Deleting All Stored Numbers
1. Unit must be in standby mode and display is
showing a valid phone record.
2. Press and hold DEL/CH button for 3 seconds
to delete all phonebook records. Display will
flash DELETE ALL?.
3. Press DEL/CH to confirm. Display will show
-NO RECORDS- for 2 seconds together with
a success keynote.
• If the memory location is empty, pressing
DEL key will have no action.
• This sequence will time-out after 30
seconds if no key is pressed.
TELEPHONE OPERATIONS TELEPHONE OPERATIONS