Filter
Top Products
4-9
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Network Configuration Menu
GARP Enabled Indicates whether the phone learns MAC addresses from
Gratuitous Address Resolution Protocol (ARP) responses.
Disabling the phone’s ability to accept Gratuitous ARP will
prevent applications that use this mechanism to monitor and
record voice streams from working. If voice monitoring is
not desired, set this option to No (disabled).
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
Voice VLAN
Enabled
Indicates whether the phone allows a device attached to the
PC port to access the Voice VLAN. Setting this option to No
(disabled) prevents the attached PC from sending and
receiving data on the Voice VLAN. This setting also
prevents the PC from receiving data sent and received by the
phone. Set this setting to Yes (enabled) if an application that
requires monitoring of the phone’s traffic is running on the
PC. These applications include monitoring and recording
applications and network monitoring software.
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
Auto Line Select
Enabled
Indicates whether the phone shifts the call focus to
incoming calls on all lines. When this option is set to No
(disabled), the phone will only shift the call focus to
incoming calls on the line that is in use. When this option is
set to Yes, the phone will shift the call focus to the line with
the most recent incoming call.
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
Video Capacity
Enabled
Indicates whether the phone can participate in video calls
when connected to an appropriately equipped PC.
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
DSCP for Cisco
CallManager to
Device Interface
Differentiated Services Code Point (DSCP) IP classification
for call control signalling.
From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
DSCP For Phone
Configuration
DSCP IP classification for any phone configuration transfer. From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
DSCP For
Phone-Based
Services
DSCP IP classification for phone-based services. From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
Security Mode Displays the security mode that is set for the phone. From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
Web Access
Enabled
Indicates whether the phone’s internal web server is enabled
(Yes) or disabled (No). When disabled, you cannot access a
phone’s web pages.
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change