Filter
Top Products
4-8
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Network Configuration Menu
SW Port
Configuration
Speed and duplex of the switch port.
If the phone is connected to a switch, you must configure
port on the switch to the same speed/duplex as the phone, or
configure both to auto-negotiate.
If you change the setting of this option, you must change the
PC Port Configuration option to the same setting.
1. Scroll to the SW Port Configuration
option and then press the Edit softkey.
2. Enter one of these values:
–
A (Auto Negotiate)
–
10H (10-BaseT / half duplex)
–
10F (10-BaseT / full duplex)
–
100H (100-BaseT / half duplex)
–
100F (100-BaseT / full duplex)
3. Press press the Save softkey.
PC Port
Configuration
Speed and duplex of the PC port. Valid values:
If the phone is connected to a switch, you must configure
port on the switch to the same speed/duplex as the phone, or
configure both to auto-negotiate.
If you change the setting of this option, you must change the
SW Port Configuration option to the same setting.
1. Scroll to the PC Port Configuration
option and then press the Edit softkey.
2. Enter one of these values:
–
A (Auto Negotiate)
–
10H (10-BaseT / half duplex)
–
10F (10-BaseT / full duplex)
–
100H (100-BaseT / half duplex)
–
100F (100-BaseT / full duplex)
3. Press press the Save softkey.
TFTP Server 2 Optional backup TFTP server that the phone uses if the
primary TFTP server is unavailable.
1. Set the Alternate TFTP option to Yes.
2. Scroll to the TFTP Server 2 option,
press the Edit softkey, and then enter a
new backup TFTP server IP address.
3. Press the Validate softkey, and then
press the Save softkey.
User Locale User locale associated with the phone user. The user locale
identifies a set of detailed information to support users,
including language, font, date and time formatting, and
alphanumeric keyboard text information.
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
Network Locale Network locale associated with the phone user. The network
locale identifies a set of detailed information that supports
the phone in a specific location, including definitions of the
tones and cadences used by the phone.
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
User Locale
Version
Version of the user locale loaded on the phone. Display only—cannot configure.
Network Locale
Version
Version of the network locale loaded on the phone. Display only—cannot configure.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change