Filter
Top Products
4-7
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Network Configuration Menu
URL Services URL of the server from which the phone obtains Cisco
Unified IP Phone services.
From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
DHCP Enabled Indicates whether DHCP is being used by the phone.
1. Scroll to the DHCP Enabled option and
press the No softkey to disable DHCP,
or press the Yes softkey to enable
DHCP.
2. Press the Save softkey.
DHCP Address
Released
Releases the IP address assigned by DHCP.
1. Scroll to the DHCP Address Released
option and press the Yes softkey to
release the IP address assigned by
DHCP, or press the No softkey if you do
not want to release this IP address.
2. Press the Save softkey.
Alternate TFTP Indicates whether the phone is using an alternative TFTP
server. If you set this option to Yes, you must enter a value
for TFTP Server 1.
1. Scroll to the Alternate TFTP option and
press the Yes softkey if the phone
should use an alternative TFTP server.
Press the No softkey otherwise.
2. Press the Save softkey.
Erase
Configuration
Changes these settings to their default values: Network
Configuration menu settings (including password), Device
Configuration menu settings, volume settings, and contrast
settings.
1. Scroll to the Erase Configuration option
and press the Yes softkey
2. Press the Save softkey.
URL Idle URL that the phone displays when the phone has not been
used for the time specified in the Idle URL Time option. For
example, you could use the Idle URL option and the Idle
URL Timer option to display a log on the LCD screen when
the phone has not been used for 5 minutes.
Use Cisco Unified Communications
Manager to modify.
Choose System > Enterprise Parameters.
URL Idle Time Amount of time in seconds that elapses before the URL
specified in the Idle URL option displays.
From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
URL
Authentication
URL that the phone uses to validate requests made to the
phone web server.
From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
URL Proxy
Server
URL used to proxy HTTP requests for access to non-local
host addresses from the phone HTTP client.
From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
PC Port Disabled Indicates whether the PC port on the phone is enabled (No)
or disabled (Yes).
Must be set to Yes for video support on the phone.
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change