Filter
Top Products
4-2
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Unlocking and Locking Options
Procedure
Step 1 Press the Settings button to access the Settings menu.
Step 2 Scroll to Network Configuration and press the Select softkey.
To exit the Network Configuration menu, press the Exit softkey.
Related Topics
• Unlocking and Locking Options, page 4-2
• Editing Values, page 4-3
• Overview of Network Configuration Options, page 4-3
• Network Configuration Menu, page 4-4
Unlocking and Locking Options
Configuration options that can be changed from a phone are locked by default to prevent users from
making changes that could affect the operation of a phone. You must unlock these options before you
can change them.
When options are inaccessible for modification, a locked padlock icon appears on the
configuration menus. When options are unlocked and accessible for modification, an unlocked padlock
icon appears on these menus.
To unlock or lock options, press **#. This action either locks or unlocks the options, depending on the
previous state.
Make sure to lock options after you have made your changes.
Caution Do not press **# to unlock options and then immediately press **# again to lock options. The phone
will interpret this sequence as **#**, which will reset the phone. To lock options after unlocking them,
wait at least 10 seconds before you press **# again.
Related Topics
• Displaying the Network Configuration Menu, page 4-1
• Editing Values, page 4-3
• Overview of Network Configuration Options, page 4-3
• Network Configuration Menu, page 4-4