Filter
Top Products
1919
1919
19
PAGE
1
USING AUTODIAL
FROM THE HANDSET
Press
TALK
.
TALK
3
Press an autodial station number you
wish to dial (0-9 on the keypad).
3
Press the autodial station number you
wish to dial (0-9 on the keypad). The
TC-540 will dial your number
automatically.
2
Press
AUTODIAL
.
AUTODIAL
AUTODIAL
2
Press
AUTODIAL
.
USING AUTODIAL
FROM THE BASE UNIT
1
Press
SPEAKERPHONE.
SPEAKERPHONE
BOTH
TONE/PULSE MIXED
DIALING
The TC-540 should be set to
PULSE
(see
page 3.) If you live in a pulse or rotary dialing
area, you can use TONE to access a long
distance service (i.e. Sprint or MCI), bank by
phone, or any other service that requires
touchtone dialing. Press
TONE
to
temporarily change from pulse to tone mode
after the line is connected.
*
1
Dial your local telephone number and
wait for the line to connect. (You dialed
your call in pulse mode.)
2
*
Press on the handset or base keypad.
Hang up and the TC-540 automatically
returns to the pulse mode.
Dial the tone numbers. This could be a
special service or access number.
3
*
REPEAT
TONE
4