Filter
Top Products
133
Chapter 12 Data Communication
4. On the screen that appears, tap the button next to SF/CSF/NX.
• At this time you could perform steps 5 through 7 under “To make
communication parameter settings” above to make communication set
up parameter settings if you want.
5. Tap Set.
6. Perform the required operations on the SF/CSF/NX Series Unit to send
data. See the manual that comes with the unit you are using for details.
Notes
• Data communication can be interrupted at any time by tapping Esc.
• If the secret memory area of the PV Unit is accessed when you receive
data, the data is stored in the secret memory area, regardless of the
memory area where it was stored in the sending unit.
• Data cannot be received from the following CASIO units: SF-A Series,
SF-5580, 5780, 5980, 5580E, 5780E, 5980E, 5590SY, 5790SY, 5990SY,
5590SYE, 5790SYE, 5990SYE, 6500SY, 6700SY, 6900SY, 7100SY,
7200SY.
• REMINDER1, REMINDER2, EXPENSE, CALENDAR, and
SPREADSHEET data cannot be received from an SF, CSF, or NX Unit.
• NX Unit PERSONAL, FAMILY, TIMETABLE, and GOLF mode data
cannot be received.
• Data from SKETCH, FREE FILE, and other SF, CSF, and NX Unit
modes for which there is no equivalent PV modes cannot be received.
• Data from ILLUSTRATION, P.O. BOX, TELEX NUMBER, and other
SF, CSF, and NX Unit entries for which there is no equivalent PV entries
cannot be received.
• All data is received in monotone, without any color attributes.
• In the case of SF Unit data that is mark protected against deletion, the
mark protection is ignored when received by the PV Unit.