Filter
Top Products
Location
You need to place your BT Synergy 4100 within 2 metres
of the mains power socket and telephone socket so that
the cables will reach.
Make sure it is at least 1 metre away from other
electrical appliances to avoid interference.
Your BT Synergy 4100 works by sending radio signals
between the handset and base. The strength of the
signal depends on where you site the base. Putting it as
high as possible ensures the best signal.
Setting up
1. Push the mains power cord into the underside of the
base until you hear it click into place and connect the
other end into the mains power wall socket. The green
Power/In use light comes on.
WARNING
Do not place your BT Synergy 4100
in the bathroom or other humid
areas.
Handset range
The BT Synergy 4100 has a range
of up to 300 metres outdoors
when there is a clear line of sight
between the base and handset.
Any obstruction between the base
and handset will reduce the range
significantly. With the base indoors
and handset either indoors or
outdoors, the range will normally
be up to 50 metres. Thick stone
walls can severely affect the range.
Signal strength
The icon on your handset
indicates when you are in range.
When you move out of range of the
base, the out of range tone will
sound every minute. This tone is
repeated until you move back into
range.
IMPORTANT
The base station must be plugged
into the mains power socket at all
times. Do not connect the telephone
line until the handset is fully charged.
Only use the power and telephone
cables supplied with the product.
Which socket?
Power socket
Telephone line socket
Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Getting started
7
Power adaptor cable