Filter
Top Products
Caller Display
If you have subscribed to your
network’s Caller Display service,
the caller’s number (or name
if stored in the phonebook) is
displayed. See page 40 for
more information.
Auto answer
As long as you have auto answer
set to ON you can just pick the
handset up off the base/charger to
answer a call. If you have switched
it off, you will need to press .
Auto answer ON is the default
setting.
Receive a call
When you receive a call, the phone rings and the Calls
light on the handset flashes. The or symbol
flashes in the display to let you know if it is an external
or internal call.
1. If your handset is on the base, pick it up to answer the call.
Or
If your handset is off the base, press .
Earpiece volume
During a call you can adjust the volume of the
earpiece/handset receiver.
1. Press or to increase or decrease the volume.
As you increase or decrease the volume, the boxes on
the display show the volume level.
Maximum volume
Mid volume
Minimum volume
Menu
Menu
16 Using the phone
Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com