Filter
Top Products
Synergy 3200 SMS user guide ~ 4th Edition ~ 16th October ’02 ~ 4678
33
To register a handset to a different
make of base station
The base must be GAP
compatible.
To put the base in registration
mode, see the base station user
guide.
At the handset:
Press the ߜ button to enter the
menu.
Press the UP or DOWN button
to scroll to Registration and
press the ߜ button.
The display will show BASE 1–4.
The numbers that are flashing
indicate the other bases that the
handset is registered to.
Enter the base number (1-4)
that you want to register the
handset to.
Press the ߜ button.
Enter your 4-digit PIN (original
setting 0000) and press the
ߜ button.
The display will show Base
search 1, 2, 3, 4 and the
symbol will flash as the handset
tries to locate the base. When the
handset locates the base, the
handset will be automatically
selected and shown on the display.
(If the handset does not locate
the base, the handset will return
to the previous menu.
Try to register again by using a
different base number. Ensure
that you are close to the base.)
Press the ߜ button to confirm.
The handset is registered.
en
u
M
C
a
l
l
s
Vol
R
e
d
i
a
l
en
u
M
en
u
M
en
u
M
en
u
M
Note
Your 4-digit PIN number is 0000
unless you have already allocated a
new PIN number as explained on
page 26.
To see the base station identity
number
This is the individual code
number of the base.
Press the ߜ button to enter the
menu.
Press the DOWN button to
scroll to Setup and press the
ߜ button.
Press the DOWN button to
scroll to Base Id.
Press the ߜ button. The identity
number is displayed.
Press and hold the
✘ button to
return to standby.
en
u
M
C
a
l
l
s
Vol
R
e
d
i
a
l
en
u
M
C
a
l
l
s
Vol
R
e
d
i
a
l
en
u
M
cr
e
c
e
y
S
ADDITIONAL HANDSETS