Filter
Top Products
Synergy 3200 SMS user guide ~ 4th Edition ~ 16th October ’02 ~ 4678
Before you use your Synergy 3200 SMS
for the first time, it is important to have
the handset batteries fully charged. The
batteries need to charge continuously for
at least 16 hours to reach full charge.
3 Charge the handset batteries
for at least 16 hours
2 x NiMH AAA rechargeable batteries
are supplied.
Install the batteries as shown.
Slide the battery compartment cover into
place (the battery cover may be found
in the packaging with the batteries).
2 Install the batteries
11
1 Connect the power supply to
the base
Plan the location
Position your Synergy 3200 SMS within
2 metres of a power socket and phone
socket otherwise extension cables will
be required.
Make sure it is at least 1 metre away
from other electrical products to avoid
interference.
Do not place your Synergy 3200 SMS
product in the bathroom or other humid
areas.
Setting up
Follow these steps to set up your Synergy 3200 SMS ready for use
Plug the power adaptor into the mains
power socket and switch on. The green
Power/In Use light comes on.
Note
The base station must be plugged into
the mains power socket at all times.
SETTING UP