Filter
Top Products
8
Synergy 2110 - Edition 5 – 23rd October ’00 (3375)
Plan the location of your
Synergy 2110
Your Synergy 2110 works by sending
and receiving radio signals between
the base station and the handset.
The strength of the signal can depend
on where you site the base station.
Generally, the higher the base station
is located the better. An upstairs room
is ideal.
The following points should be
considered:
• It should be within 3 metres of a
power socket and phone socket
otherwise extension cables will be
required.
• Try to avoid locations near metallic
obstructions or electrical appliances,
such as TV sets, fridges, computers,
fluorescent lights, radiators, metal
pipes and metal window frames.
• Make sure it is at least 1 metre
away from other electrical products
to avoid interference.
1
Connect the power cable
Plug the power cable into the power
socket on your Synergy base station.
Plug the adaptor into the mains power
supply and switch on.
The Power/In Use light comes on.
Setting up
Follow these steps to set up your Synergy 2110 ready for use.
Please note
The Synergy 2110 has a range of up
to 300 metres outdoors and up to
50 metres indoors. It is possible that
the range may be affected by being
near water (e.g. large ponds, lakes
and the sea) as well as large metal
objects (e.g. radiators, metal
partition walls and steel girders).
SETTING UP