BT 3010 Cordless Telephone User Manual


 
6
Follow these steps to get
your Diverse 3010 Micro
ready for use
Note
Plan where you will put your Diverse 3010
Micro. It should be within two metres of
a power socket and the phone socket.
Note
Your handset is already “registered” to the
Diverse 3010 Micro base station.
1 Connect the power cable
Plug the power cable into the power
socket on the underside of your
Diverse 3010 Micro. The power cable
connector is coloured red. Please take
care that the telephone cord and
power cable plugs are connected to the
correct socket as incorrect placement
could damage the base station.
Red socket
Note
Ensure that the telephone line cord and
the power supply are plugged into the
correct socket.
Note
Use only the power adaptor
C39 280-Z4-C174/..–C67 with your
Diverse 3010 Micro.
2 Plug the 3 pin adaptor
into a mains power socket
and switch on
SETTING UP