29
Error beep
Lets you know that you have made a
mistake when following a procedure.
Default setting is ON.
In range beep
Tells you the handset is back within
range of the base station.
Default setting is OFF.
• Press the
MENU button.
• Select SETTINGS.
• Select HANDSET SETTINGS.
• Select BEEPS.
• Switch the beep you want to modify.
• Use the
ON and OFF option buttons to
remove or add the beep.
• Press the
OK option button to confirm.
Or
• Come out of the beeps menu by
pressing the
GO BACK option.
To switch ON and remove the
backlight
The light is activated by touching a
button or by the detection of an incoming
call. The default setting is ON. If you
remove this you will not see the current
battery charging level.
• Press the
MENU button.
• Select SETTINGS.
• Select HANDSET SETTINGS.
• Select AUTO BACKLIGHT.
• Switch the light ON or OFF using the
ON/OFF options.
• Press the
OK option to confirm.
Or
• Come out of the menu without
changing the light by pressing the
GO BACK symbol.
RED
I
ON
N
RED
OFF
RED
OK
RED
I
ON
N
RED
OFF
RED
OK