BT BT Domus Cordless Telephone User Manual


 
When charging the battery from flat,
it will take about one minute for the
handset display to power up.
The charge capacity of rechargeable
batteries will reduce with time as they
wear out, giving the handset less
talk/standby time. Eventually they will
need to be replaced. New batteries are
available from the BT Domus Helpline
on 0870 605 8047.
For instructions on how to install a
new battery, see page 8.
2. Insert the Li-ion rechargeable battery supplied into the handset.
Then slide the compartment cover into place.
3. Place the handset on the charger to charge for at least 24 hours.
Any additional handsets supplied as part of a multipack are
pre-registered to the base so, once charged, are ready for use.
The handset number is shown in the display.
Set date and time manually
1. Press
Menu
and scroll to
Clock & Alarm
then press
Select
.
2. Scroll to
Set Time
and press
OK
.
3. Enter the time using the 12 hour clock and press
OK
to save.
4. Press
Back
and scroll to
Set Date
. Press
OK
.
5. Enter the date, e.g. 22/09/2007 and press
OK
to save.
Then press
Back
to return to standby.
If you wish to set the day now as well, please refer to page 34.
Your BT Domus is ready for use.
Getting started 9
BT Domus – Issue 2 – Edition 4 – 22.08.07 – 8314
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Date and time
Providing you have subscribed to your
network’
s Caller Display service, the
date and time is set automatically for
all handsets when you receive your
first call. If you do not have a Caller
Display service you can set the date
and time manually.
The date and time is recorded with
each answering machine message
you receive.
To change bewteen the 12 and 24
hour time format, see page 33.
8314 Domus UG [Iss.2Ed.4] 22/8/07 10:17 Page 9