Filter
Top Products
32
BT Domus – Issue 2 – Edition 4 – 22.08.07 – 8314
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
System PIN
1. Press
Menu
, scroll to
Base Settings
and press
Select
.
2. Scroll to
System PIN
and press
OK
.
3. Enter the old PIN (original setting 0000) and press
OK
.
4. Enter the new PIN and press
OK
.
5.
Retype PIN
is displayed. Re-enter the new PIN and press
OK
.
First ring
1. Press
Menu
, scroll to
Base Settings
and press
Select
.
2. Scroll to
First Ring
and press
OK
.
3. Press or to
On
or
Off
then press
Select
to confirm.
4. Press
Back
to return to the previous menu level.
Base settings
The System PIN is used when changing
certain settings and registration /
de-registration. The default setting is
0000. You can change this to your own
preferred 4-digit number.
If you make a mistake, press
Clear
to
delete digits.
If you enter the incorrect PIN, the
handset will sound an error beep and
return to the base settings menu.
If you have subscribed to your network’s
Caller Display service, your BT Domus
does not ring until the caller information
has been received and displayed.
However, if you want your handset to
ring without waiting f
or the caller
information to be displayed, set
First
Ring
to
On
. Please note that this will
mean the first ring you hear will be the
default ringtone. This will change to a
ringt
one you have set once the caller
information is displayed for the
caller’s number.
8314 Domus UG [Iss.2Ed.4] 22/8/07 10:17 Page 32