BT 7150 Telephone User Manual


 
No display appears
The handset may be switched off.
Press and release the button to switch the handset on.
The batteries may be flat, dead or incorrectly inserted. Recharge, replace or renew the
batteries.
No dial tone
Make sure your handset is registered to the base and within range of the base.
Is the telephone cord of the base plugged into the phone socket?
Check that the base station is connected to the mains power and switched on.
You cannot link up with the base station
Does the display show
Out of Range?
If so, you are out of range of the base the handset
is registered to or power is off at the base.
Batteries could be low or flat.
If using more than one base station, check that you have the correct base selected.
Handset does not ring
The ringer volume may be switched off (if it is there will be a icon on the display).
Press
and hold to switch it off and on. To adjust the ringer volume on the handset,
see
page 55.
69Help
BT Freestyle 7150 – Edition 3.1 – 23.11.05 – 7130
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com