Filter
Top Products
Setting up for multiple packs
If you have purchased a BT Verve 450 multiple pack, you will
need to prepare any additional handsets and chargers for use.
For each additional handset and charger:
1. Insert the cable through the channel at the rear of the charger
and insert the plug into the power socket. Plug the other end
into the mains wall power socket and switch on.
2. The NiMH battery is already fitted in the handset. Remove the
battery compartment cover, by sliding it downward and lifting
off. Locate the battery lead and connector and plug it into the
socket inside the battery compartment (the red wire should be
on the left). Tuck the battery leads in the space above the
battery and slide the battery compartment cover back on.
Charge the battery for at least 20 hours.
9Getting started
Usingyour BTVerve 450on a
Broadbandline?
If this product is tobe used on a
broadband linethen you must ensure
that it is connectedvia an ADSL
microfilter. Using this producton a
Broadband linewithout an ADSL
microfiltermay cause problems with
this productand your Broadband
service.
Additional BT ADSL microfilterscan be
purchased from www.shop.bt.com
If you experience anyproblems, please call the Helpline on 0800218 2182*or email bt.helpdesk@vtecheurope.com