BT 450 Answering Machine User Manual


 
If you forget to switch on your answering machine
1. Call your number from another phone and let it ring. After 20
rings the machine will switch on and answer your call.
2. Enter your remote access PIN. Play back your messages as
shown below in ‘Operating your answering machine remotely’.
If you do not choose to switch your answering machine On, it
will switch off when the call is ended.
Operating your answering machine remotely
1. Dial your phone number. When you hear your outgoing
message, press . You will hear, “Please enter your
security code”.
2. Enter your 4 digit Remote Access PIN. You will hear, “You have X
new messages”. If you only have old messages you will hear “You
have X messages” followed by “To hear main menu press 1”.
When you have accessed your BT Verve 450, you can use the
keypad to operate your answering machine. Follow the
announcements and instructions you hear.
Play main menu
Play all messages
Play new messages only
Skip back to previous message
Answering machine
If you enter theincorrect PIN codeyou
will be allowed onefurtherattempt, if
it is stillincorrect you willhear, “Thank
you for calling”,and your BTVerve
450 will hang up.
If no button ispressed for8 seconds or
more, yourBT Verve 450 willhang up.
53
If you experience anyproblems, please call the Helpline on 0800218 2182*or email bt.helpdesk@vtecheurope.com
IMPORTANT
Youshould change the securityPIN
from theoriginal setting of 0000.
It is advisable tomake a note of
your new PIN codeand keep it
somewhere safe.
To changeyour answering machine
PIN see Answer Settings,page 48.