BT 450 Answering Machine User Manual


 
Dateand time
Providing youhave subscribed toyour
network’s Caller Display service, the
date andtime is set automatically for
all handsets when youreceive your
first call.
The dateand time is recorded with
each answering machine message you
receive.
If you do nothave a Caller Display
service you can setthe date and time
manually.
Any additional handsets supplied as part of a multipack are
pre-registered to the base so, once charged, are ready for use.
The handset number is shown in the display.
Set date and time manually
1. Press
Menu
and scroll to
Settings
and press
OK
.
2. Scroll to
Clock/Time/Alarm
then press
OK
.
3.
Date
/
Time
is highlighted. Press
OK
.
4. The current Time format is highlighted. Scroll or
to choose
24 hour
or
12 hour
.
5. Scroll to
Date format
and scroll or to choose
dd/mm
or
mm/dd
.
6. Scroll to
Enter time
and enter the time
e.g. 1705 for 5 05 pm.
7. Scroll to
Enter date
and enter the date, e.g. 09 06 07
for 9th June 2007.
8. Press
OK
to save.
9. Press
Back
until you return to standby.
Your BT Verve 450 is ready for use.
10 Getting started
If you experience anyproblems, please call the Helpline on 0800218 2182*or email bt.helpdesk@vtecheurope.com