Filter
Top Products
26
Wall- mo u nt i ng
Your Response 125
can be wall-mounted
using the screws and
wall plugs provided.
Use the wall-mounting
template opposite as
a guide for the drill
holes.
Before you wall-mount
your Response 125,
check that:
• the wall can support
the weight of the phone;
• the position you choose
leaves sufficient space
so that the phone is
clear of any obstruction
on the wall, such as a
shelf or cupboard.
Press the phone line
cable into the channel
on the bottom of the
phone, so that the
phone lies flat against
the wall.
Hang the holes on the
back of the phone
over the screwheads
and gently pull the
phone downward to
make sure it is
securely in place.
Rotate the handset
hook 180°, so that
you can hang up the
handset when the
phone is wall-
mounted.
Drill two holes for the
screws and insert the
wall plugs provided
(if required).
Drive the screws into
the wall, leaving about
4mm free on which to
hang the phone.
Wall-mounting
template
94 mm
3 mm hole
28 mm