Filter
Top Products
18
1
2
3
To use call screening
Your Response 125
can answer an
incoming call for you,
allowing you to
identify the caller and
decide whether to
take the call.
Make sure that the
volume is set to an
audible level. (See ‘To
adjust the volume’,
page 11)
Allow the incoming
call to be answered by
your Response 125 as
normal. You will hear
the caller begin to
leave their message.
If you decide to take
the call, lift the
handset and you can
speak to the caller.
Recording will stop
automatically.
If, when you lift the
telephone handset, your
Response 125 does not
stop recording, either
replace the handset and
lift again, or press the
STOP button.
To cancel any
procedure
Pressing the STOP
button will cancel any
procedure currently
in progress.
After pressing the
button your Response
125 returns to ‘answer
on’ mode.
These functions of the
Response 125 will not
operate whilst the handset
is off the base unit:
• Volume control.
• Checking/recording/
deleting outgoing
message.
• Checking and setting
day and time.
• Switching answering
machine on/off.
• Checking and setting
answer delay.
• Recording a memo.