Filter
Top Products
19
Enter the first digit of
your security code.
You hear a beep.
Enter the second digit
of your security code,
If you have no
messages, you will
hear ‘You have no
messages. Thank you
for calling’.
...and your Response
125 will disconnect the
line.
If you have messages,
you hear...
Your Response 125
will then play your
messages, with the
day and time they
were recorded.
3
4
Remote access
Control your Response 125 from
another telephone using a
Touchtone™ keypad.
If you hear 4 short beeps,
it means you have entered
the wrong security code
and are invited to try
again. Do not re-enter
✱.
If you take more than 8
seconds to enter a
number, you hear ‘Thank
you for calling’ and your
Response 125 disconnects
the line.
To replay the message
you are listening to
While the message is
playing, press 4 once
on your telephone
keypad
The message will
replay from the
beginning.
You can turn your
Response 125
answering machine
on, and listen to your
messages from any
Touchtone™
telephone. To protect
your privacy,
messages can only be
accessed by keying in
a 2 digit security code.
For your security code,
look on the underside
of your Response 125’s
base unit. (You cannot
change the currently
set code).
To check for
messages
Dial your phone
number and wait.
When you hear your
outgoing message,
press the ✱ button.
You hear 2 beeps.
1
2
You have x messages.
Message 1.