Filter
Top Products
If you adjust the
volume during playback,
the beep does not sound,
but the volume changes
accordingly.
If you set the volume
below mid-level, it will
automatically return to
its middle setting when
any buttons are pressed
on the answering
machine. The volume is
unaffected during remote
access or call screening.
To record your
outgoing message
The outgoing message
is the message a caller
hears when your
Response 125 answers
a call.
The Response 125 has
a pre-recorded
outgoing message
which announces...
11
Using the
an swering
machine
To adjust playback
volume
Press + to increase
the volume.
Press - to decrease
the volume.
As you press, a beep
sounds at the level
you have selected.
When the volume is at
its highest or lowest,
you will hear two
beeps.
You can record your
own outgoing
message to replace
the pre-recorded
message. If you
record your own
message, the
pre-recorded message
will automatically be
removed and stored
in the memory in
case you wish to
reinstate it.
Your Response 125 has
a total recording
capacity of 14 minutes.
Any outgoing message
you record can be up to
2 minutes long, but you
should keep it short to
allow more time for
recording incoming
calls.
Hello,your call cannot
be taken at the moment,so please
leave your message after the tone.
Beep!