Filter
Top Products
Time saver
Your Response 125 is pre-
set to TIME SAVER. This
means that during remote
access, if any messages
have been recorded your
Response 125 will answer
after only 2 rings. If there
are no messages, it will
answer after 6 rings,
thereby allowing you the
option of hanging up
before your Response 125
answers, to avoid paying
for the call.
Press and hold down
the ANSWER ON/OFF
button. Your Response
125 will announce the
current answer delay
setting.
Keep holding down
the ANSWER ON/OFF
button. Your Response
125 announces the
answer delay options...
When you hear the
setting you want,
release the
ANSWER
ON/OFF
button. After
2 seconds the new
answer delay setting is
announced, before
your Response 125
returns to ‘answer on’
mode.
To receive incoming
messages
Your Response 125
will automatically
record an incoming
message when it is
connected to your
phone socket and is
set to ‘answer on’.
When your Response
125 has received new
messages, the display
light flashes.
15
Skip Skip
1
2
Time Saver
Time Saver,
2,3,4,5,6,7,8,9
Answer delay,
4 rings
Two minutes is the
maximum time available
for each incoming
message. If the maximum
message length is reached,
your Response 125
announces “Thank you
for calling” and
disconnects the line. If the
memory is full, then it
will announce, “Memory
full, thank you for calling”
and disconnects the line.
Your Response 125
has a recording
capacity of up to 14
minutes. If the
recording memory is
full, the LED flashes
rapidly and your
answering machine
will not record further
messages.
To play back
messages
Press the PLAY button.
Your Response 125
announces