Filter
Top Products
Range indicator
The symbol on your handset display indicates when
you are in range of the base. If the symbol flashes and
you hear a warning beep, you are out of range and will
need to move closer to the base. The display shows
Base
and the number of the base last used.
Set date and time.
If you have subscribed to your network’s Caller Display
service, the time and date will be set automatically when
you receive your first call. You can also set the time
manually.
1. On the handset, press MENU. Scroll to
Time
Settings
and press OK. Scroll to
Set Date & Time
and press OK.
2. Enter the date, e.g. for 16th April.
Press OK.
3. Enter the time, e.g. for 9:30am.
Press OK. This overwrites the current setting. If you make
a mistake press CLEAR to delete.
The time and date is saved.
4. Press and hold CLEAR to return to standby.
0
3
D
E
F
9
W
X
Y
Z
0
4
G
H
I
0
6
M
N
O
1
9Getting started
Running the batteries right down
at least once a week will help them
last as long as possible.
The charge capacity of rechargeable
batteries will reduce with time as
they wear out, so reducing the
talk/standby time of the handset.
Eventually they will need to be
replaced. New batteries can be
obtained from the BT Equinox
Helpline 0870 605 8047.
Helpline
If you have any difficulties setting
up your BT Equinox 1200, please
call the BT Equinox Helpline on
0870 605 8047.
BT Equinox 1200 – Edition 6 – 28.05.04 – 5757
5757 Equinox 1200 UG 28/5/04 10:32 am Page 9